Serial Number and IMEI Tracking for Mobile and Electronics Shops: Purchase Scan, Sale Scan, Warranty and Returns

By BillAmico Tax & Compliance Desk | | 11 min read

A shop that sells soap can count units. A shop that sells phones, laptops or televisions must know which exact unit it sold, because the warranty, the return and the police query all point to one serial number. This guide explains serial number and IMEI tracking for mobile and electronics shops: what to scan on purchase and on sale, how to handle warranty and returns, what to show on the GST invoice and how to match scanned units against the stock count.

1. What serial number and IMEI tracking means

A serial number is a code that identifies one single unit of a product, such as a laptop, a television or an air conditioner. An IMEI (International Mobile Equipment Identity) is the unit-level identifier of a mobile phone. An IMEI has 15 digits and the last digit is a check digit. A dual-SIM phone carries two IMEIs, one for each SIM slot.

Serial number tracking means the shop records the serial number or IMEI of every unit when it comes in, and again when it goes out. After that, the shop can say exactly which unit went to which customer on which date.

FeatureBatch trackingSerial or IMEI tracking
What is trackedA group of units made togetherOne single unit
One identifier coversMany unitsExactly one unit
Typical goodsFood, medicines, cosmeticsPhones, laptops, appliances, watches
Main purposeExpiry and recallWarranty, theft check, returns and unit-level audit

info: Some products need both. A branded water purifier may have a serial number for warranty and the carton may also carry a batch code. Track the identifier that matters for the claim you expect to handle.

2. Why quantity alone is not enough in a mobile or electronics shop

Suppose your stock says 12 units of a phone model. A customer returns one that was bought 20 days ago and says it is faulty. If you only track quantity, you cannot confirm that the returned phone was sold by your shop, that it is the same unit that you sold, or when the warranty began. You also cannot tell if a different, cheaper phone was swapped in.

Unit-level tracking solves these problems. It also protects you from unknowingly buying or selling a stolen or blocked device, and it makes a unit-level audit possible when the owner wants to know why the count is off by two.

3. Purchase side: scan every unit when the goods arrive

The inward purchase entry is where serial tracking starts. For each item that is marked as serial-tracked, scan or type the serial number or IMEI of every unit, so that the number of scanned units equals the quantity on the supplier's bill.

  • Open the carton, not just the outer label. Scan the number on the device or its box, and confirm that the two match.
  • For dual-SIM phones, record both IMEIs, or at least the primary one, and follow the same rule on every purchase.
  • Reject a duplicate. A serial number already in stock, or already sold, cannot arrive a second time. This catches both data entry errors and attempts to pass off a used unit as new.
  • Do not accept the purchase entry until scanned units equal the billed quantity. A mismatch is the first sign of a short or wrong shipment.

Worked example. A distributor bills you 10 phones of one model. You scan 10 IMEIs and the system accepts the entry. If you had scanned only 9, the entry would stay open and show 1 unit still to be scanned.

4. Sale side: scan at the counter and print it on the bill

At the time of sale, the cashier scans the serial number or IMEI of the unit being handed over. The system links that unit to the customer and the invoice, removes it from available stock and can print the serial number on the bill.

  • Scanning the unit in the customer's hand, not a different box on the shelf, is the point. Train staff to scan the actual unit sold.
  • The system should stop a sale if the scanned number is not in stock or was already sold.
  • Print the serial number or IMEI and the warranty period on the invoice. The customer then carries proof that the shop can verify later.

Linking the unit to the sale is what lets you answer a warranty or police query in seconds. Search the IMEI, and the bill, the customer name and the date appear.

5. Warranty tracking

Most products come with a manufacturer warranty. The shop usually acts as the first point of contact. For a warranty claim to be handled quickly, the shop needs three facts: the serial number, the date of sale and the warranty period. All three can be read from the linked sale record.

  • Warranty normally starts from the invoice date unless the manufacturer's terms say otherwise. Check the warranty card for the exact rule.
  • A manufacturer warranty and a shop's own promise are different things. Do not print a longer warranty on your bill than the manufacturer supports unless you are ready to honour it yourself.
  • Keep the serial number on file for as long as the warranty and any statutory claim period can run.

Consumer protection law in India also gives buyers rights against defective goods and unfair practices. A clear serial-linked record helps both sides settle a dispute quickly. Read the Consumer Protection Act, 2019 or ask a professional if a dispute goes beyond a normal warranty claim.

6. Returns, exchanges and credit notes

When a customer returns a unit, scan its serial number against the original sale. The system should confirm that it was sold by your shop, show the date and let you decide whether to accept it for a refund, an exchange or a repair.

If you refund or reduce the value after the original invoice is issued, GST law expects a credit note under Section 34 of the CGST Act. The credit note should refer to the original invoice and should list the returned unit's serial number so the stock goes back correctly. The full rules on credit and debit notes are covered in the guide on GST credit and debit notes under Section 34.

SituationWhat to doDocument
Customer returns a unit and takes a refundScan the unit, put it back in stock or in a faulty stock binCredit note against the original invoice
Customer exchanges for another unitScan the returned unit and scan the new unitCredit note and a new invoice, or an adjusted invoice as per your tax advice
Unit is faulty on arrival (dead on arrival)Check the supplier's return terms and photograph the issueDebit note to the supplier when goods are returned
Unit goes for repair under warrantyRecord it as sent for repair, not as sold or returnedDelivery challan, if goods leave the shop

7. GST invoice details for serial-tracked goods

A GST tax invoice follows Rule 46 of the CGST Rules. The serial number or IMEI is not a required Rule 46 field as the rule is generally understood, but printing it in the item description is common and useful. It also makes a unit-level audit easy for the buyer.

  • Use the correct description and HSN code for the product. Mobile phones usually fall under heading 8517, but confirm the right code and the current GST rate from the latest notification, because rates and classifications are revised from time to time.
  • Show the taxable value, the GST rate and the tax amount separately, with CGST and SGST for sales within the state and IGST for sales to another state.
  • If your turnover requires e-invoicing, check whether serial details can be reported in the item or batch details of the e-invoice schema.
  • Keep the purchase invoice with the serial numbers for as long as the warranty and your record retention period run.

tip: If you sell a phone with a bundled accessory, list the accessory as a separate line only if your tax advisor says so. How a bundle is invoiced can change the tax treatment.

8. Stock reconciliation with serial numbers

Serial tracking turns a stock count into a list-matching exercise. The system holds a list of serial numbers it believes are in stock. During the physical count, staff scan the units on the shelf and in the godown. The difference between the two lists is exact, so you can name the missing units.

Worked example. The system shows 48 phones of one model in stock. Staff scan 46. The reconciliation lists the two IMEIs that were not scanned.

IMEI endingIn systemScannedFinding
...4821YesNoCheck recent sales and repair records
...9307YesNoFound sold on an invoice dated two days ago but not scanned at sale

Both gaps are now explained or investigated by unit, rather than by a vague count of two missing phones. Once explained, post the correction through a proper stock adjustment, which is covered in the guide on physical stock verification and stock adjustment.

9. Stolen and blocked phones: take reasonable care

Buying a used phone or taking one in exchange carries a risk that the device was stolen. The Department of Telecommunications runs the Central Equipment Identity Register (CEIR) and the Sanchar Saathi portal, where a citizen can report a lost phone and have its IMEI blocked, and where an IMEI can be checked. Check the current facilities on the Sanchar Saathi website before you accept a used device.

  • Record the IMEI, the seller's name and an identity document when you accept an exchange or buy a used unit.
  • Check the IMEI status where such a facility is available.
  • If the device turns out to be blocked, do not resell it, and take legal advice about reporting it.

BillAmico can track serial numbers and IMEIs for items that have the serial tracking option switched on: the inward purchase scans the numbers, the sale scans the IMEI and prints it on the bill, and the unit is marked as sold for warranty tracking.

Frequently asked questions

What is an IMEI number and how many digits does it have?

IMEI stands for International Mobile Equipment Identity. It is a 15 digit number that identifies a mobile phone, and the last digit is a check digit. A dual-SIM phone has two IMEIs.

Is it mandatory to print the IMEI on the GST invoice?

The IMEI or serial number is not among the standard Rule 46 invoice fields as generally understood, but printing it in the item description is common practice and helps with warranty and audit. Confirm any specific requirement with your tax professional.

How do I handle a phone that the customer returns?

Scan its IMEI against the original sale, confirm it was sold by your shop, decide on refund, exchange or repair, and issue a credit note under Section 34 of the CGST Act when the invoice value is reduced. Put the unit back in stock or in a faulty stock bin.

What if the number of scanned units does not match the billed quantity on purchase?

Do not complete the purchase entry. A mismatch means a short, extra or wrong shipment. Resolve it with the supplier first and record the difference through a debit note if you return goods.

Should I keep serial numbers after the warranty ends?

Keep the sale and purchase records with serial numbers for at least your statutory record retention period, because they also support audits and tax queries. Check the retention period for your registration type.

Official sources

Related guides