GST Billing Software for All States and Union Territories of India: State Codes, CGST SGST IGST and Place of Supply

By BillAmico Tax & Compliance Desk | | 12 min read

GST billing software for all states and union territories of India must read the state in your GSTIN and your customer's address, then charge CGST plus SGST for a same-state sale or IGST for a sale to another state. This guide lists all 36 state and UT codes, explains the three tax heads and shows how auto-split billing keeps every invoice correct from Kashmir to Kanyakumari.

1. GST billing software for all states and union territories: why the state matters on every bill

GST is one tax with two collectors. When both the supplier and the place of supply are in the same state, the tax is split equally between the Centre (CGST) and that state (SGST). When the sale crosses a state border, the whole tax is charged as IGST, which is shared between the Centre and the destination state through the GST system.

That means the state of the supplier and the state of supply decide the tax heads printed on your invoice. A shop in Haryana billing a customer in Haryana prints CGST and SGST. The same shop billing a customer in Delhi prints IGST. If the software gets this wrong, your customer cannot claim input tax credit correctly and you may face mismatch notices.

BillAmico detects the customer's state and applies the intra-state CGST plus SGST split or the inter-state IGST charge automatically, as part of billing. The rest of this guide explains how the state code works so you can verify the software's output yourself.

2. How the state code works inside a GSTIN

A GSTIN has 15 characters. The first two digits are the state or UT code. The next ten characters are the PAN of the business. The thirteenth character counts registrations of the same PAN within the state, the fourteenth is normally the letter Z, and the last character is a check character.

For example, the GSTIN 06AAVCS2554D2Z5 starts with 06, which is Haryana. Anyone reading that number can tell the registration is in Haryana before reading anything else. The same logic lets software decide whether a sale is within the state or between states.

BillAmico asks for the 15-digit GSTIN of a customer and can auto-fill the legal name, trade name and address from it. The state code from the GSTIN is then used as the place of supply for registered customers.

info: A registered customer's state code comes from their GSTIN. For an unregistered customer you choose the state manually, and the place of supply follows the delivery or billing address rules.

3. All 36 state and UT codes

This is the commonly used list of GSTIN state codes. Two legacy codes exist for historical reasons: 25 was Daman and Diu before it was merged with Dadra and Nagar Haveli under code 26, and 28 was Andhra Pradesh before Telangana was formed and Andhra Pradesh moved to 37. Always confirm the latest list on the GST portal before you rely on it.

CodeState or union territoryType
01Jammu and KashmirUnion territory
02Himachal PradeshState
03PunjabState
04ChandigarhUnion territory
05UttarakhandState
06HaryanaState
07DelhiUnion territory
08RajasthanState
09Uttar PradeshState
10BiharState
11SikkimState
12Arunachal PradeshState
13NagalandState
14ManipurState
15MizoramState
16TripuraState
17MeghalayaState
18AssamState
19West BengalState
20JharkhandState
21OdishaState
22ChhattisgarhState
23Madhya PradeshState
24GujaratState
26Dadra and Nagar Haveli and Daman and DiuUnion territory
27MaharashtraState
29KarnatakaState
30GoaState
31LakshadweepUnion territory
32KeralaState
33Tamil NaduState
34PuducherryUnion territory
35Andaman and Nicobar IslandsUnion territory
36TelanganaState
37Andhra PradeshState
38LadakhUnion territory

The portal also uses special codes such as 97 (Other Territory) and 99 (Centre Jurisdiction) for specific purposes. These are not normal business locations.

warning: State and UT lists change by law. Whenever a state is reorganised, codes can be added or retired. Treat the list above as a working reference and verify against the official GST portal before configuring any system.

4. Intra-state and inter-state: CGST, SGST, UTGST and IGST

SituationTax heads on the invoiceWho receives the tax
Supplier and place of supply in the same stateCGST + SGST (each half of the rate)Centre and that state
Supplier and place of supply in the same union territory without a legislatureCGST + UTGST (each half of the rate)Centre and that UT
Supplier and place of supply in different states or UTsIGST (the full rate)Shared by the Centre and the destination state through the GST system

Union territories without a legislature (for example Chandigarh, Andaman and Nicobar Islands, Lakshadweep, Ladakh and Dadra and Nagar Haveli and Daman and Diu) use UTGST in place of SGST. Delhi, Puducherry and Jammu and Kashmir have legislatures and are generally treated like states for this purpose. Because this classification is a legal matter, confirm the current position on the GST portal if your business is in a union territory.

The rate itself does not change. An 18 percent GST item is charged as 9 percent plus 9 percent inside a state and as 18 percent IGST across states.

5. Worked example: Rs 10,000 of goods at 18 percent, three destinations

A shop in Haryana sells goods with a taxable value of Rs 10,000 at an 18 percent rate. The tax is Rs 1,800 in every case; only the heads change.

Customer locationTax headsAmountsInvoice total
Ambala, Haryana (same state)CGST 9% + SGST 9%Rs 900 + Rs 900Rs 11,800
New Delhi (another state or UT)IGST 18%Rs 1,800Rs 11,800
Pune, Maharashtra (another state)IGST 18%Rs 1,800Rs 11,800

The customer in Ambala claims credit of CGST and SGST in their GSTR-3B, while the customers in Delhi and Pune claim IGST. If the software printed CGST and SGST on the Delhi bill, the Delhi buyer would have trouble matching it in GSTR-2B.

6. Place of supply in plain words

For goods, the place of supply is generally the location where the goods are delivered or where the movement ends. If goods are sold at the counter and taken by the buyer, it is the shop's state. If goods are shipped to a buyer in another state, it is the destination state.

For a registered customer the GSTIN usually settles the question. For an unregistered customer at the counter, the place of supply is normally your own state. For a bill-to and ship-to arrangement with different addresses, the rules are more detailed. Our guide on place of supply (/blog/place-of-supply-igst-vs-cgst-sgst-billing-guide) goes through them step by step.

BillAmico lets you add a separate ship-to or consignee address on a bill, so a delivery to another location is recorded cleanly on the invoice.

7. E-way bills across states

The e-way bill is generated on a national portal, and it applies to movement of goods above the notified value. BillAmico shows an E-Way Bill Required banner on bills of Rs 50,000 or more and prepares the JSON file with transporter ID, vehicle number and distance for the portal.

Rules for movement of goods inside a single state can differ from state to state, for example in the value above which an e-way bill is needed for intra-state movement. Check the current rule for your state on the e-way bill portal and with your CA. Our e-way bill guide (/blog/eway-bill-rules-threshold-and-compliance) explains the main rules.

8. Language and support across India

BillAmico offers a one-click toggle between Hindi and English on both the desktop and mobile apps, including Devanagari labels and numerals. That serves a large part of north, central and west India directly.

Other regional languages are not offered today. Staff in regions where Hindi or English is not comfortable should test the interface in the free trial before you commit. Support is available on WhatsApp and phone at +91 74043 36331 and by email at info@billamico.com.

tip: Because BillAmico works offline, a shop in a remote area with poor connectivity can still bill all day. Only cloud backup, mobile sync and updates need internet.

9. State-readiness checklist before you buy

  • Enter your own GSTIN and confirm the state shown matches the first two digits.
  • Create one customer from your state and one from another state and bill both.
  • Check the tax heads printed: CGST plus SGST for the first, IGST for the second.
  • If you are in a union territory, ask support how UTGST is shown on your invoices.
  • Export GSTR-1 data and confirm that interstate sales fall under the correct tables.
  • Create a bill of Rs 50,000 or more and see the e-way bill prompt.

Frequently asked questions

Does GST billing software need to know my state?

Yes. The state in your GSTIN and the place of supply on each bill decide whether CGST plus SGST or IGST is charged. BillAmico reads the customer's state and applies the split automatically, so you do not calculate it by hand.

What is the GST state code for Haryana, Delhi and Maharashtra?

Haryana is 06, Delhi is 07 and Maharashtra is 27. The first two digits of any 15-character GSTIN are the state or UT code. Confirm the latest list on the GST portal before configuring software.

What is UTGST and when is it charged?

UTGST replaces SGST for sales within a union territory that has no legislature, such as Chandigarh, Andaman and Nicobar Islands, Lakshadweep, Ladakh and Dadra and Nagar Haveli and Daman and Diu. It is charged together with CGST in equal halves. Check the current position on the GST portal for your territory.

Can one billing software handle customers from every state in India?

Yes. A GST-aware billing product holds the full list of state codes and applies IGST for any other-state customer. Test one same-state and one other-state bill in the free trial and check the tax heads on each.

Is BillAmico available in regional languages?

BillAmico supports Hindi and English only, with a one-click toggle on desktop and mobile. Other regional languages are not available, so staff who need them should test the interface in the 14-day free trial.

Official sources

Related guides