Billing Software for Electrical and Sanitary Hardware Shop: Metre and Coil Units, Challans and Credit Khata
By BillAmico Tax & Compliance Desk | | 9 min read
Billing software for an electrical and sanitary hardware shop must handle items sold in different units, such as wire by the metre or the coil and pipes by the length or the bundle. Pick software with dual units, delivery challans and a credit khata, and test each on your own price list in the trial.
1. What billing software for an electrical and sanitary hardware shop needs
An electrical and sanitary shop stocks wires, cables, switches, MCBs, bulbs, pipes, taps, fittings, tanks and many brands of each. The same item often comes in several sizes, and many items are bought in one unit and sold in another. The customer mix is also split: a homeowner buys one tap, while a contractor buys fifty fittings for a site and pays later.
That mix creates specific software requirements: unit conversion, a rate that can be changed on the bill for a contractor, material sent to a site before the final bill, and a ledger of what each contractor owes.
| Shop need | What to look for in the software |
|---|---|
| Wire sold by metre, bought by coil | Primary and secondary unit with a conversion factor |
| Many sizes and brands | Variant matrix and barcode per variant |
| Contractor and walk-in rates | A rate that can be typed over on any bill line |
| Material sent to site | Delivery challan converted to invoice later |
| Contractors who pay in lots | Credit khata and payment against bills |
2. Dual units: buy a coil, sell a metre
Electrical wire usually arrives in a coil of 90 metres, but customers ask for 5, 12 or 25 metres. Sanitary pipes arrive in bundles and are sold by the piece or the length. If the software tracks only one unit, you end up doing the conversion on paper and your stock number drifts from reality.
BillAmico lets you set a primary unit, a secondary unit and a conversion factor on the item. For example, the primary unit is metre, the secondary unit is coil and 1 coil equals 90 metres. You can type either unit while billing, and the stock always deducts the exact metres.
Worked example: you buy 10 coils of wire, which is 900 metres of stock. A customer buys 25 metres, a contractor buys 1 coil and another customer buys 12 metres. Total sold is 25 + 90 + 12 = 127 metres, so stock left is 900 - 127 = 773 metres, or 8 coils and 53 metres.
| Sale | Quantity entered | Stock deducted (metres) |
|---|---|---|
| Walk-in customer | 25 metres | 25 |
| Contractor | 1 coil | 90 |
| Walk-in customer | 12 metres | 12 |
| Total | | 127, leaving 773 of 900 |
tip: Set the conversion once on the item master and double check it with a small test sale. A wrong conversion factor makes every later stock number wrong.
3. Brands, sizes and barcodes
A single switch plate model may come in several colours, and a tap may come in several finishes. The variant matrix lets a parent item hold its variants, each with its own barcode. Scanning a variant deducts that variant's stock, while the parent item shows the combined stock.
For loose items such as screws, washers and connectors, print your own barcode sticker on a thermal label roll and attach it to the bin or bag. That removes the need to search by name for each small sale.
If your suppliers send several brands of the same product, keep the brand in the item name or variant so that the right rate and stock are used at the counter.
4. Contractor rates and dealer rates
Most hardware shops quietly keep two or three price levels. A walk-in customer pays MRP, a regular contractor gets a lower rate, and a small shopkeeper who buys from you gets a dealer rate.
BillAmico keeps the selling rate on the item, and the rate can be typed over on any bill line. A contractor or dealer can be billed at the agreed rate for one transaction without changing the item master.
Worked example: a fitting sells at ₹1,000. A walk-in customer buying ten pieces pays ₹10,000 before tax. For a contractor with an agreed rate of ₹850, the cashier types ₹850 on the bill line and the ten pieces come to ₹8,500 before tax.
5. Material to the site: delivery challans and conversion to invoice
A contractor often asks you to send material to a site and bill only for what is used. A delivery challan dispatches the goods and deducts physical stock without creating tax liability, because the sale is not final yet.
When the contractor confirms the quantity used, convert the challan to an invoice, delete the lines for returned material and save. The returned items stay in stock, and the used items become a tax invoice with GST.
If goods are moved in value above the e-way bill limit, the software shows an e-way bill prompt for bills of ₹50,000 or more and can create the portal JSON. The exact legal rules, limits and exceptions are set by notification, so confirm current rules with the official portal or your CA.
info: A delivery challan is not a tax invoice. Make sure the challan details are complete and that the final invoice is issued once the sale is settled.
6. Credit khata for contractors and builders
Contractors usually settle in lots. Record each credit sale to the contractor's party account and use Payment In when money arrives. The software settles the oldest bills first, and a part payment leaves the rest due, so you always see which bill is still open.
Reminders let you send a payment reminder over WhatsApp for an overdue balance, which saves repeated phone calls.
7. What to test in the 14-day free trial
The 14-day trial is fully unlocked with no credit card required. Use your actual price list.
- Enter ten wire and pipe items with primary and secondary units and sell them in both units.
- Confirm stock after three mixed sales matches your own hand calculation.
- Type over the rate on a bill line for a contractor and confirm the item master rate does not change.
- Create a delivery challan for a site, then convert it to an invoice after removing returned items.
- Record a part payment from a contractor with three open bills and check which bills are cleared.
- Print a bill on your thermal printer with silent printing on.
Frequently asked questions
Can billing software handle wire sold by metre and bought by coil?
Yes, if it supports dual units. In BillAmico you set a primary unit, a secondary unit and a conversion factor, for example 1 coil equals 90 metres, and billing in either unit deducts the exact metres from stock.
How do I give different rates to contractors and walk-in customers?
Keep the normal selling rate on the item and type over the rate on the bill line for a contractor. The change applies to that bill only and does not change the item master.
What is a delivery challan and when should a hardware shop use it?
A delivery challan dispatches goods without a final sale, for example material sent to a site on approval. It deducts stock without creating tax liability and can be converted to a tax invoice once the sale is confirmed.
Does the software alert me about e-way bills?
BillAmico shows an e-way bill prompt for bills of ₹50,000 or more and creates portal-ready JSON. Rules and exceptions are set by notification, so verify them on the official portal or with your CA.
Is there a free trial before I buy?
Yes. A 14-day fully unlocked free trial is available with no credit card. The Desktop and Mobile Combo is ₹6,000 plus GST one-time, and the Multi-User LAN Edition is ₹14,000 plus GST one-time.